Thursday, September 16, 2010

Rugby Cement – ball mill drive shaft recovery0comments

Following a journal failure on a 40-tonne/hour cement ball mill at RMC’s cement plant in Rugby, Metalock Engineering UK, Coventry orbitally machined the badly scored shaft to clean up enabling a new white metal bearing to be fitted and the mill returned to production with minimum disruption.

The Rugby Works ball mill had been operational for over 35 years and was due for replacement, indeed the new machine was on order, but the journal failed before the new mill was due for delivery. The mill is the last on the production line and blends and grinds clinker and gypsum together with other additives to make cement. As production could not be suspended until the new mill arrived, the Rugby Cement management team called in Metalock to discuss the situation and a possible solution.

Metalock’s recommendation was to orbitally machine the 1200mm diameter, 600mm long journal and remove sufficient material to clean up the shaft. This was accepted and following removal of 3mm from the diameter, the mill was re-assembled using a new white metal bearing to suit the revised shaft dimension.

Orbital machining involves having the cutting tool revolve around a stationary shaft. To achieve this at Rugby Cement, the inner bearing ring of the orbital turner was attached to a temporary bearing housing on the ball mill casing with the outer bearing supported on a temporary shaft extension. The rotating cutting tool head was driven via a hydraulic motor.

Orbital turning is just one of the services Metalock offers as part of its on-site machining capabilities. Others include milling, grinding and boring, all using specialist portable machine tools that the company has designed and built. This latest application demonstrated Metalock’s ability to provide solutions in emergency situations and enable a customer to resume production quickly and efficiently.

Commenting on the Metalock operation Julian Ward, Plant Maintenance Engineer at Rugby said that they knew the mill was reaching the end of its life but hoped it would remain in production until the new one arrived. “It didn’t, but Metalock’s expertise helped us out of a spot and got us back into production with minimum delay and disruption”, he added.

In a typical ball mill orbital turning operation the inner bearing ring of the orbital machine is attached to a temporary bearing housing on the ball mill casing with the outer bearing supported on a temporary shaft extension.

Wednesday, September 15, 2010

White House Defers To Pelosi On Tax Cuts

President Obama’s aides say the White House is trying to take a step back and let Democratic leadership figure out the best way to handle the question of the Bush tax cuts.

The president made his preference clear, and he’ll keep helping the Democrats on the stump with the rhetorical definition of their party versus the Republicans. A White House aide said it’s possible Obama might talk about the tax cuts issue during his Cabinet meeting scheduled for tomorrow.

Democrats are huddling tonight with members to see what sort of bill they could support so close to the critical midterm elections.

An administration official said the legislative affairs team is consulting with Speaker Nancy Pelosi’s office to be of assistance where they can. The aim is to craft a bill which helps vulnerable Democrats but exposes the Republicans, the aide said, adding that’s not as easy as it sounds.

When Freshman Rep. Gerry Connolly, for example, says he’d be okay with a temporary extension of the tax cuts for the middle class and the rich, that complicates things, the aide said. (Connolly (D-VA) represents one of wealthiest districts in the nation. He’s said he gets Democrats’ arguments about just the middle class, but he also wants to help his own constituents.)

But the White House aide said word on Capitol Hill is that Democratic staffers are trying to come up with something that puts more spin on the ball, perhaps by creating a new tax bracket for millionaires. “They are trying to figure out something along those lines,” the aide said.

ball mill 

Jaw crusher design and maintenance Introduction

In the mineral processing equipment inside, crushing machine is mainly used to crush ore preliminary materials, which work environment is bad, therefore its constituent bodies need a certain amount of optimization and enhanced, should have the necessary knowledge in order to maintain efficiency in production to improve and equipment stability.

As the jaw crusher set by the dynamic E and E constitute the work of the chamber formed under enormous crushing force and friction materials, easy to wear bad, in order to protect the jaw, Hongsen Mining moving surfaces E and E be installed wear of the liner, this liner is also known as broken boards. Broken plates are usually made of tooth surface, and broken plates tooth peak angle 90 ° ~ 120 °, its size has been broken by the fragmentation properties of the materials and determined, breaking bulk materials, the angle should be bigger; broken small piece of material, the angle can be smaller. Pitch depends on the product size, usually get about equal to the width of the discharge port, the high gear ratio with the preferred pitch of 1 / 2 to 1 / 3.

Work, the broken plate wear rate under the two parts is not the same, lower wear faster than the upper, broken plates in the jaw crusher work, direct contact with materials to withstand the great crushing force and friction materials, broken board lifetime is directly related to jaw crusher efficiency and production costs, therefore, to extend the broken jaw crusher plate life is particularly important. E-board to enhance service life can be broken breaking design, material selection, assembly and use of process improvement and other considerations.

At design time, dynamic E and E of the broken board should be set teeth on the tooth peak valley. Thus, when breaking materials in addition to compression, there are bending and breaking of materials easier. To enhance the life of broken plates, small and medium sized crusher broken down into a board design symmetrical shape, a U-turn immediately after the Department of wear use; large jaw crusher broken board designed a few pieces of each symmetry to be worn exchange use the broken board. Broken plate white cast iron materials can be used. Large white cast iron hardness, good wear resistance, the source is easy and cheap; drawback is brittle, easily broken, short life.

In order to improve the life of broken boards, materials with more than 12% manganese steel manganese better common is ZGMn13. Manganese steel toughness, although the hardness is not high (about 210HB), however, because a cold hardening characteristics, under pressure and will continue to be strengthened, so continue to wear it at work continued to strengthen until the wear and tear can not be used to was scrapped. . Manganese steel casting broken board after going through the tough water treatment, water treatment operations generally tough and quenching the same, that is broken is cast out of manganese steel plate heated to 1000 ~ 1100 ℃ in the water after the rapid cooling. Ren treated water can be uniform microstructure, the microstructure and to fixed to avoid the use of the natural deterioration of the phase change not needed. Manganese disadvantage is more expensive, but life, cost, general considerations, ZGMn13 than the white cast iron long life, low cost.

Assembly, the broken plate must be securely attached to E-board, should be pad level between the two, broken plates and the jaw between the use of soft metal (such as lead, zinc, etc.) for gaskets and bolts tightened. Crusher work, broken plate should not be loosening, or easily broken or worn broken plate, reducing the life of broken plates. Therefore, the assembly must be installed, broken plates, thus extending the life of broken plates.

In the production process, broken plates and materials directly, broken very great, especially when broken material hardness greater, leading to installation of bolts broken plate vibration, nut loose, so that broken plate wear and greatly increase the noise, severe broken off or broken plate to equipment downtime, affecting the normal production. In this situation, just before the start tightening bolts, nuts, can not completely resolve the problems, according to the actual situation on site concrete analysis of concrete, practical ways to methods to solve the problem. For example, you can use spring anti-vibration device to resolve broken loose at work in the loose board, thus prolonging the life of broken boards and improve efficiency.

Specific approach is to use spring anti-loose bolts and self-made compact device, which from the inside spring cover, spring, spring cover is composed of outside, to wear the device in the bolt tightening nut, nut because spring is compressed to a certain degree, have a very strong vibration effect produced by the tremendous force of the bolt broken loose by the spring tension automatically power up, so loose bolts Bu Zhiyu, thus extending the life of broken plates, to increase productivity. In short, the process can be used for specific situations to find ways to solve specific problems, to prevent the broken plate loosening, wear increased, broken, etc., thus extending the life of broken plates, reduce costs and enhance efficiency.

Tuesday, September 14, 2010

Best Colleges 2011

This year, Harvard University regained sole possession of the top spot in U.S.News & World Report's Best Colleges 2011 rankings of national universities. Last year, Harvard and Princeton University tied for first, but Princeton fell to second in the 2011 rankings of these large, research-oriented institutions. Williams College can once again boast that it's the nation's top-ranked national liberal arts college —a category of schools that place a higher emphasis on undergraduate education—as it ranked a spot ahead of fellow Massachusetts liberal arts school Amherst College for the second consecutive year.

More from USNews.com:
Photo by Jim Lo Scalzo for USN&WR
Full National Universities Rankings List

Photo by Jim Lo Scalzo for USN&WR
New Sites Empower Students to Create Their Own Scholarships

Photo by Jeffrey MacMillan for USN&WR
College Rankings: Premium Content

This marks the 27th year that U.S. News has published college rankings. Though the top-ranked schools garner much acclaim, the rankings aren't produced simply to benefit students who are considering attending institutions like Harvard and Williams. U.S. News uses its array of college data to provide insight to students of various academic and socioeconomic backgrounds. There is a list of the best schools for B students, rankings of historically black colleges and universities, as well as rankings of the most diverse national universities. And though the worst of the financial crisis seems to have passed, finding value in the increasingly expensive world of higher education is still one of the most important — if not the most important —factors in choosing a school. To meet that need, U.S. News has compiled best value lists for national universities and national liberal arts colleges, which rank schools based on the average cost of attending — after need-based grants are taken into account — relative to their academic ranking.

The National Universities and National Liberal Arts Colleges lists are just two of several sets of rankings that are a part of U.S. News's evaluation of Best Colleges. Regional colleges and universities, which tend to draw heavily from their local area, and tend to have sparse doctoral program offerings, are ranked separately. Villanova University, Rollins College, Creighton University, and Trinity University are the top-ranked Regional Universities — schools that offer degrees up to the master's level and were ranked as "Master's Universities" in the past — in the North, South, Midwest and West, respectively. The top-ranked Regional Colleges — schools that offer bachelor's degrees and were classified as "Baccalaureate Colleges" in previous rankings — are the United States Coast Guard Academy in the North, Ouachita Baptist University in the South, Taylor University in the Midwest, and the United States Air Force Academy in the West.

Though California's public educational system is plagued by financial unrest and budget cutbacks, two of the state's schools are ranked as the top public national universities. The University of California-Berkeley, which is the 22nd ranked national university, is the top-ranked public school, followed by the University of California-Los Angeles. Rounding out the top five publics: University of Virginia, University of Michigan-Ann Arbor, and the University of North Carolina-Chapel Hill.

Though schools at the top of the rankings deserve praise for their sterling academic standards, they shouldn't receive all of the credit. U.S. News asked college administrators to name schools they believe to have made sharp improvements to their academics and campus facilities. Based on the results, U.S. News ranked the top "Up and Comers" across several categories. The University of Maryland-Baltimore County was determined to be the fastest-improving national university and Hendrix College earned top billing for National Liberal Arts Colleges. The best up-and-coming Regional Universities are Wagner College in the North, Elon University in the South, Butler University in the Midwest and Abilene Christian University in the West.

harvard_law.jpg
Jorge Antonio/iStockPhoto

1. Harvard University
City: Cambridge, MA

Total Enrollment: 19,411

2010-2011 Tuition and Fees: $38,416

Application Deadline: 1/1

princeton_university.jpg
Jeffrey MacMillan for USN&WR

2. Princeton University

City: Princeton, NJ

Total Enrollment: 7,592

2010-2011 Tuition and Fees: $36,640

Application Deadline: 1/1

Yale_MacMillan.jpg
Jeffrey MacMillan for USN&WR

3. Yale University

City: New Haven, CT

Total Enrollment: 11,593

2010-2011 Tuition and Fees: $38,300

Application Deadline: 12/31


©Columbia University

4. Columbia University
City: New York, NY

Total Enrollment: 24,230

2010-2011 Tuition and Fees: $43,304

Application Deadlin

What is a Ball Mill?

Cylindrical ball mill  is designed with a ball milling system for thermal power plants using conventional materials, it features strong resistance to wear and long service life. Our casting products strictly in accordance with enterprise standards Q/SHT003-1998 production, product quality supervision and inspection by the province to pass the test product, and a number of indicators over corporate standards.
Many types of ball mills, grinding coal by working parts can be divided into three types of speed, that low-speed mill, pulverizers and high-speed mill.
The working principle of ball mill: ball mill is a horizontal cylinder rotating device, outer gear, the two positions, lattice-type ball mill. Material from the feed device into the compound by air evenly into the mill screw shaft first warehouse, the warehouse there are ladder liner or corrugated liner, built in different specification steel balls, steel ball cylinder rotation produces centrifugal force brought to a certain height after the fall, produce severe impact on the material and abrasive. To coarse grinding of materials in the first position after the board by the single compartment into the second warehouse, the warehouse lined with flat lining, steel ball inside, the material to further grinding. Powder discharged through the discharge grate plate to complete the grinding operation.
Purpose and scope of Ball Mill:

Ball mill is a ball mill, is the material being broken, and then smash the key equipment. Coal ball mill can be dry or wet grinding.
Ball mill is broken and ground into a pulverized coal machinery, it is important equipment pulverized coal fired boilers. Coal grinding process is broken and the surface area of coal is increasing process. To add a new surface area, must overcome the binding force between the solid molecules, and therefore the consumption of energy. Coal grinding mill was made of coal, mainly through the crush, crushed and ground in three ways. Process in which crushed the energy consumption of most provinces. Pulverization process is the most cost energy. Various mill in the milling process are both the above two or three ways, but mainly depends on what kind of mill type.
Structural characteristics of Ball Mill:

 Ball mill by the feeding part, discharging the Ministry Rotary Department, the Department of transmission (reducer, small transmission gear, motor, electric control) and other major components. Hollow shaft with steel casting, lining Replaceable, slewing gear hobbing by casting process, the body inlaid cylinder liner wear, has good wear resistance. Ball Mill smooth operation, reliable work.

Monday, September 13, 2010

Taylor and Kanye Both Sing About Kanye at MTV Awards

At the MTV Video Music Awards, Taylor Swift and Kanye West both unveiled brand new songs about the same topic: Kanye West.

But the two performers had wildly differing views on their mutual subject matter. Somewhat contrary to expectations, Swift's song was pro-Kanye, in its fashion, while West's self-lacerating confessional was anti-Kanye.

These two will never be on the same page, will they?

In the end, neither tune was necessarily a classic for the ages, but it was intriguing to hear zeitgeist artists approaching controversy in thoughtfully autobiographical new music rather than, you know, tweets. And the Swift and West appearances added what little drama there was to an anticlimactic show that mostly rode on the coattails of last year's water-cooler moment-filled telecast.

Galvanizing, love-'em-or-hate-'em stars Lady Gaga and Katy Perry were relegated to non-performing slots, meaning the only live fireworks were provided by Taylor's and Kanye's glancing lyrical allusions to last September. This 2010 sequel could have been titled "The 2009 MTV Video Music Awards: The Afterthought."

A few highlights and lowlights:

Swift forgiveness. Midway through the telecast, Swift debuted a tune she wrote after last year's VMAs debacle, when West rushed the stage and declared her an unworthy winner right in the middle of her acceptance speech. Anyone expecting the new song to be a rant in the vengeful tradition of her broadsides against ex-boyfriends had to have been taken aback by the ballad's solemn tone and lyrics, which offered only one immediately specific reference to West, mentioning his age at the time of last year's show.

"You're still an innocent, 32 and growing up now," she sang, in a maternal-sounding chorus, bolstered by a hairdo straight out of a 1940s glamour session. "Wasn't it easy... in fly-catching days... before the monsters caught up to you? It's all right, just wait and see. Your string of lights are still bright to me... Time turns flames to embers. You'll have new Septembers. Every one of us has messed up too..."

West-ern mea culpas. If you tuned in wanting to hear someone sing about what a big jerkola Kanye is, your viewing was not in vain, as West was all too happy to oblige, swinging back—for the moment?—to the anti-hubris, self-denigration side of his mood pendulum.

Coming out in a red suit in a blindingly white stage setup, West didn't sound much like the "innocent" Swift described him as earlier. "I always find something wrong/You been putting up with my [bleeped] too long," he sang, seeming to be addressing an intimate partner he'd wronged, as opposed to Swift herself. "I'm so gifted at finding what I don't like the most/So I think it's time for us to have a toast..." He then offered that "toast" to the "scumbags" of the world, along with a lot of less printable terms, before offering this advice: "Run away fast as you can... Run away from me baby."

Like Swift, he strode off the stage at a rapid clip at the conclusion of his number, as if both of them meant to say, There will be no questions. Oh, but there will, there will, when fans comb through their respective albums for psychological clues this fall.

Diva-lessness. Sure, Lady Gaga and Katy Perry both seem to have performed on every awards telecast in the last two years and are dangerously exposed. But this show could have used them as performers and not just presenters or winners. Like West and Swift, Gaga also debuted a new song—but in a very fleeting, a capella snippet that she belted out during her final acceptance speech of the evening.

"I promised if I won this tonight," Gaga said, holding her Video of the Year award—the last of eight trophies her videos won before and during the telecast—"I'd announce the name of my new album." Actually, she'd mentioned the title earlier, although she made it official in her last trip to the podium by singing a few bars of the title song of her forthcoming release... Born This Way.

Anyone who feels he or she was specifically created by God to wear animal innards as outerwear: Anthem, incoming! 

Perry neither performed nor won, but as a presenter, a red-carpet favorite, and a subject of host Chelsea Handler's jokes, her presence fed into the general nostalgia for the 2009 awards show, as everyone recalled how she met fiancee Russell Brand on that night that shall go down in infamy. A night without Perry performing with some kind of fruit adorning her cleavage is like a day without sunshine.

Later, Chelsea. The host announced at the outset that she was a little woozy from being in a prayer circle with Snoop Dogg, which might explain the lack of sharpness in Handler's musty, not-very-outrageous one-liners about the most obvious possible targets. Jokes about how young and virginal Justin Bieber is might as well have been leftovers from Russell Brand's rude riffs on the Jonas Brothers in MTV years past.

An opening backstage sketch where Lindsay Lohan told Handler to lay off the sauce should have been a highlight, but Lohan was apparently also cured of her ability to handle comedy while in rehab. The one laugh-worthy moment: Handler crawled into a hot tub with the cast of Jersey Shore and crawled out nine months pregnant.

But talk about missed opportunities. You release a dove on stage and then don't make a Kings of Leon pigeon joke?

Fears of heights. Wherever that dove settled in the rafters of the Nokia Theatre, it was probably near the evening's most-used camera, which offered plenty of overhead views of choreography of people laying down on the stage, in performances by Florence & the Machine and others. Taylor Swift's hairdo wasn't the only '30s/'40s-styled element of the evening. Busby Berkeley lives!—even if the dance moves choreographed for the overhead camera couldn't have made much sense to the live audience on the ground.

The award for best, most fantastic, world-beating hyperbole. That would be a tie. At the start, an announcer declared, "Welcome to the biggest night of the year." Eat MTV's dust, Christmas, New Year's, and Halloween!

But then there was the presenter who breathlessly announced that Usher has "the grace of a classical performer." Which was exactly right, because not since Baryshnikov lip-synched his way through a tribute to Tron has there been such a classical performance as Usher's "OMG."

Finally, Justin Timberlake introduced Drake as "the most exciting new artist in music right now," right before a number in which, while creditable, the most exciting new artist in music was completely overshadowed by duet partner Mary J. Blige.

The suspense of the live voting for best new artist. In a shocking upset, Broken Bells were beaten by Justin Bieber. Ernst & Young probably had to do a hand-recount for that particular photo finish.

Bieber-mania, unabated. There was something a little creepy about the rampant sexualization of Justin Bieber by the grown women on the show, from Handler's gags to a nearly naked-looking Kardashian gal joking that the teen star had gotten a restraining order against her. It was sheer coincidence that Bieber's performance of "Baby" was immediately followed by a contraception commercial... we hope.

Bieber's outdoor number on the Nokia plaza was not a highlight, particularly with all those male backup dancers in "B" letterman jackets, as if Bieber Academy is a school every guy aspires to attend. But it did end nicely with the heartthrob taking a drum solo, showing that he wants to be Nick Jonas when he grows up.

Better red than dead. Sometimes it seemed like every woman at the show was a redhead. Florence, of "& the Machine" fame? Check. Hayley Williams of Paramour, who sang with B.o.B.? Rihanna? Check. In a poufy white skirt, white halter top, and red 'do, Ri-ri looked a little like how Amy Adams might have after losing her innocence in an Enchanted sequel.

MIA-inem. Rihanna's "surprise" appearance at the end of Eminem's opening performance added some flair to an otherwise surprisingly unremarkable medley. The self-help platitudes and cheesy kettle drums on "Not Afraid" just don't represent the Em we know and fear, though setting the number in a mock club before he bounded onto the real Nokia stage did bring back some nice 8 Mile flashbacks.

But when it was announced that Enimem had already left by the time he won two on-air awards, it was as if his early departure symbolized waning interest in the show. Explaining his absence, the presenters were forced to keep saying the superstar rapper had had to catch a flight to New York to perform with Jay-Z at a show. Making those pressing 6 a.m. showtimes back east can really be tough on an artist.

Rock: still in hibernation. Is there such a thing as a major rock & roll band now? If so, it wasn't represented on the VMAs. Linkin Park's appearance seemed impressive, at least until viewers figured out that it was the Griffith Observatory setting that was impressive. But their now rap-less NIN/U2 hybrid sound didn't exactly make them rebels without a cause. If there was a rock band you'll remember from the evening, unfortunately, it may be the group in that annoying credit-check commercial.

The what awards? "God bless pop music and God bless MTV," said Lady Gaga... leaving viewers puzzled as to what those two things have to do with each other. More explicable was Gaga's best line of the night: "I never thought I'd be asking Cher to hold my meat purse."

Meat purse (and dress) or no, at least Gaga didn't shed any blood, guts, or gore during the course of this particular evening. But "bloodless" probably isn't the way the 2010 VMAs would prefer to be remembered.

What were the standouts and low points for you?

 grinding ball mill

five technical advantages of vibrating screen in screening equipment

Mineral processing equipment in the main equipment for grading spiral classifier, vibrating screen, circular vibrating screen, vibrating screen. Depending on the production process or production line to choose a rational screening equipment is particularly important.
Vibrating Screen (high product sieve) from exciter, ore pulp distributor, screen frame, frame, suspension springs and sieve, etc. components. For mineral processing, coal preparation, chemicals, bricks, food, pharmaceutical, alkali, fertilizer, paper and other industries in a variety of materials, dry, wet screening, grading, dewatering operations.
Production of high-clothes sieve shaker machine has the following performance advantages:
1. Exciter drive through the transmission screen surface for high-frequency vibration, static sieve box. Vibration system near resonance in the work machine through vibration support, so the ground does not bear the basic dynamic load screen machines do not need the system as a foundation, directly on the solid flat ground or ordinary steel platform can work properly.
2. Screen surface vibration frequency of 50Hz, the amplitude of 0 to 2 mm, vibration intensity of acceleration of gravity of 8 to 10 times that of the general mechanical shaker vibration intensity of 2 to 3 times. Screen surface is not easy plugging holes, high efficiency, large capacity. Especially suitable for the screening of fine powder materials. Grade size 0.074 ~ 1mm.
3. Screen surface from the three different composition of the flexible screen. The underlying network to support the steel core polyurethane mesh, wire diameter and lay above all not the same double-mesh stainless steel wire braided network. Composite layer network of online, direct contact with the material for screening work for the end of the lower composite mesh network, for the dispersion and transmission of vibration force to ensure the network of high screening efficiency and prolong life. Screen hooks at both ends for easy handling and adjustment of tension degree screen. Feeding buffer sieve to disperse uniform pulp, to avoid clash
4. Vibration of flexible elastic material of high quality transmission link, long-term reliable operation; screen machines for the energy-saving products. Single exciter power only 0.15kW, mineral commonly used in electromagnetic shaker 2420, the whole power consumption of not more than 1.2kW / Taiwan.
5. Sieve box side with the overall bending molding steel, both to enhance the overall stiffness and work screening machine reliability, equipment will look better.
Meanwhile, the vibrating screen can be configured according to customer's different needs of different types of cabinet, to achieve the parameters set, the remote central control, and fault alarm history and other additional features.
Sieve shaker and the use of high frequency, similar to, but for dressing materials and process details are different.